12-Port(with 8 PoE+/PoE++) Full Gigabit Managed Industrial PoE Switch
FR-7M3408 is an L2+ Managed Industrial PoE switch with 8-Port 10/100/1000Base-TX and 4 Gigabit uplink ports that provide stable and reliable industrial network transmission. With a high-standard industrial grade design, such as IP40 housing, Fanless, -40℃ to +75℃ operating temperature. It can supply power to PD terminal equipment at harsh environments, such as video and process monitoring, ITS, and Smart manufacturing.
Managed Industrial Network Switch with PoE
FR-7M3408P L2+ Managed Industrial PoE switch has high-standard industrial grade and synchronously supplies power and data to power devices across a copper cable.
Connects such as Wireless AP, IP Camera, and VoIP Phones satisfy both IEEE802.3bt PoE++ and gigabit ethernet connection. Which undoubtedly increases bandwidth for higher performance to transfer large amounts of services across ethernet networks.
Smart PoE Features
- IEEE802.3af/at/bt standard automatically identifies power devices without damaging non-PoE devices.
- Up to 90W per port.
- PoE++ Switch port will supply power to the high priority level port when the power budget is insufficient.
- PoE output power allocation, Scheduling of PoE operation.
Advance Layer2+ Features
- Build a redundant network with STP/RSTRP/MSTP/ERPSv2.
- IPv4/IPv6 Management and Static Route
- ACL Based on MAC, IP address.
- Retagging and complicated flow classification based on VLAN, MAC/IP.
- Flexible bandwidth control policies.
High-Performance Network Management
- Web-based CloudMQTT to monitor the PoE Network anytime, anywhere.
- Command-line interface(CLI) and Firo WebGUI management for configuring major managed functions.
- SNMPv1/v2C/v3 for different levels of network management.
- FIRO Web-based NMS enable discovery and diagrams of PoE++ Switch network topology.
Complete Security Mechanisms
- AAA&RADIUS, IEEE 802.1X, SNMPv3, HTTPs/SSLv3,SSH2.0 to enhance network security.
- Support user hierarchical management, ACL control list
- Port isolation within the same VLAN, DHCP-Snooping
- DDOS, port-based MAC filtering/binding, MAC black holes, IP source protection, ARP message speed limit
Industrial Grade Design Suit for Harsh Environment
Durable Aluminum housing and fanless design also provide efficient heat dissipation. Indeed, The design of the switch ensures operates at a wide temperature(-40 to +75℃). The industrial PoE switch also supports Energy-Efficient Ethernet(EEE) to reduce power consumption by 50% while retaining compatibility with existing equipment.
Compliance with IEEE802.3af/at/bt PoE++ Standard
Port 1-8 complies with IEEE802.3af/at/bt standard. Another critical point is which can automatically detect and recognise the power devices that meet the standard and supply power through the network cable.
Build Up Secure Network with L2+ PoE Switch
FR-7M3408P provides robust Layer 2+ Gigabit networks connectivity, including but not limited to Static route, LAN network security, ACL/QoS policy… Moreover, It can improve network reliability to configure STP/RSTP/MSTP/ERPSv2. As can be seen, the Managed Industrial PoE Switch is easy to manage and maintain.
Manage the Industrial PoE Network Anytime, Anywhere
Managed Industrial PoE Switch allows various network management methods, such as the WebGUI, CLI and NMS. The notion of easy to use, particularly with no additional hardware investment and installation. Industrial PoE Switch can deploy centralised management, real-time monitoring, checking PoE usage and scheduling PoE operation.
Industrial and factory automation systems.
Outdoor electrical application.
Rail and intelligent transportation system(ITS).
Oil and gas platforms.
Clean Energy System
Industrial Ethernet switches have a wide operating voltage range, while regular switches require higher voltages. Regular switches are basically single power supply, while industrial switch power supplies are generally dual power supply backup. Industrial Ethernet switches can be installed in DIN rails and racks.
2×100/1000Base-FX (SFP Slots)
4×100/1000Base-FX (SFP Slots)
|Port Mode(Tx)||Auto Negotiation Speed
Full/Half Duplex Mode
Auto MDI/MDI-X Connection
|Standards||IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.3ad for Port Trunk with LACP
|Console||1x RJ45-to-RS232 Serial Port(115200)|
|Packet Buffer Size||2Mbits|
|Maximum Packet Length||Up to 9K|
|MAC Address Table||4K|
|Transmission Mode||Store and Forward (full/half duplex mode)|
|Exchange Property||Delay time: < 7μs
Backplane bandwidth: 20Gbps
|Max. No. of VLAN||64|
|VLAN ID Range||VID 1 to 4094|
|PoE & Power Supply|
|PoE Ports||Port 1 to 8 IEEE802.3af/at @PoE+||Port 1 to 8 IEEE802.3af/at/bt @PoE++|
|Power Supply Pin||Default: 1/2(+), 3/6(-)||Default: 1/2(+), 3/6(-) or 4/5(+), 7/8(-)|
|Max Power Per Port||30W||90W|
|Total PWR /Input Voltage||240W(DC48-56V) (Model dependent)||480W(DC48-56V) (Model dependent)|
|Power Consumption||10 Watts Max(without PoE load)|
|Input Voltage||9-56VDC,Redundant dual inputs|
|Operating Voltage||Non-PoE Mode: 9-56VDC
30W PoE Mode: 48-56VDC
90W PoE Mode: 52-56VDC(IEEE802.3bt model)
|Connector||1 removable 6-contact terminal blocks
Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm
|Protection||Overload Current Protection, Reverse Polarity Protection|
|Redundancy Protocols||Support STP/RSTP/MSTP/ERPSv2, Link Aggregation|
|Multicast Support||Support IGMP Snooping V1/V2/V3，support GMRP, GVMP,802.1Q|
|VLAN||Support IEEE 802.1Q 4K VLAN，support QINQ, Double VLAN,|
Flow-based rate limiting
Flow-based packet filtering
8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
|ACL||Port-based Issuing ACL
ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message.
Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc
|POE Management||Total power limit of PoE power supply
PoE output power allocation
PoE output priority configuration
PoE working status
Scheduling of PoE operation
|Diagnostic Maintenance||Support port mirroring, Syslog, Ping|
|Management Function||Support CLI、WEB、SNMPv1/v2/v3，Telnet server for management, EEE, LLDP, DHCP Server/Client(IPv4/IPv6), Cloud/MQTT|
|Alarm Management||Support 1 way relay alarm output, RMON, TRAP|
|Security||Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0
Support DHCP Snooping, Option 82，802.1X security access,
Support user hierarchical management, ACL access control list,
Support DDOS，port-based MAC filtering / binding, MAC black holes, IP source protection, Port isolation, ARP message speed limit
|Advance Layer 2+ Features||IPv4/IPv6 Management