24G+4*10G SFP+ Layer 3 Managed PoE Switch
- IEEE 802.3af/at/bt PoE++ Standard, without damaging not-PoE devices.
- Advanced PoE management functions: PoE output setting, Smart PoE, PoE scheduling and PoE Budget Management.
- The priority system for PoE Port, it will supply power to the high-priority level port first when the power budget is insufficient.
- Layer 3 Model support OSPFv2, RIPv2, and Static Route.
- TACACS+, SNMPv3, IEEE 802.1X, HTTPS and SSH to enhance network security.
- Link Aggregation, STP/RSTP/MSTP/ERPS for network redundancy.
- ROMON for proactive and efficient network monitoring.
Increase your network performance and reliability with Layer 3 PoE Switch
The Layer 3 10G Commercial Grade Managed PoE Switch is a reliable and powerful networking solution for businesses of all sizes. This switch is designed to deliver high-performance, secure, and scalable connectivity. It features 10 Gigabit Ethernet ports and supports up to 48V PoE+ power budget. The switch also comes with a web-based management interface for easy configuration and monitoring.
Advance Network Configuration
- Support OSPFv2,RIPv2,ERPSv2
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease planning
- Class of Service(Port-based, 802.1p…), Trusted QoS, Rate Limitation
- Support LLDP, LLDP-MED
- BPDU Filtering, Self Loop Detection
Secure and Simplified Access
- CLI(Console/Telnet(RFC854)), WebUI(HTTPS), SNMPv3
- HTTPS/SSLv2v3,TLSv1 RADIUS, TACACS+,AAA SSHv1/v2
- Support DHCP Snooping, Option 43/82, 802.1X security access
- Support user hierarchical management
- Support DOS, port-based MAC filtering/binding, MAC whitelist
Smart PoE Features
- IEEE802.3af/at standard automatically identifies power devices without damaging non-PoE devices.
- PoE+ Switch port will supply power to the high-priority level port when the power budget is insufficient.
- PoE output power allocation, Scheduling of PoE operation.
High Reliable and Multi-Service Support
- Support the Spanning Tree Protocols (STP, RSTP, MSTP)
- Support the IPv4 and IPv6 multicast functionsVoice VLAN, Surveillance VLAN
- Support traffic classification of each field of L2/L3/L4 protocol headers
- Support IGMP v1/v2/v3, IGMP snooping, MLD
Layer 3 PoE Switch – A robust solution for businesses of all sizes
The Layer 3 Managed PoE Switch can provide non-blocking communications and wire-speed throughput in looking to easily build a 10G fiber network. A layer 3 managed PoE+ switch can make it happen. This type of switch offers easy management and configuration of your network, as well as powerful 10G performance. Plus, with PoE+ support you can easily add devices like IP cameras or VoIP phones without having to worry about extra power supplies. So if you’re looking for an easy way to get started with 10G networking, a layer 3 managed PoE+ switch is the way to go.
Simplified and Secure Power over Ethernet Networks
The L3 10G Rack Mount Managed PoE Switch supports both routing protocols: RIP and OSPF. When RIP is enabled, it uses hop count as a metric for routes. As a result, this prevents routing loops by limiting the number of hops in any path from source to destination. The other one, OSPF (Open Shortest Path First), is a link-state dynamic routing protocol that’s different from RIP’s (strict distance-vector) method of calculating routes. When enabled, this means that when networks send link state updates to peers, each layer 3 switch will collect information about its network links and build a Link State Database. As a result, the Shortest Path First algorithm can then calculate the fastest route available based on that database.
Layer 3 PoE Switches are the best way to optimize IoT networks and reduce the cost of deploying new devices.
IoT and IIoT networks often require a voice VLAN. VoIP devices with an IPcam interface are able to use Voice VLANs and Surveillance, which is a new type of VLAN. They use this feature to create either a voice-only or Surveillance VLAN that’s exclusive to digital devices. This offers the possibility for disruption in industrial networks by providing an alternate voice solution for digital controllers that are connected to analogue devices.
Layer 3 PoE Switch with LLDP-MED, which enhances the automation/management of certain types of network devices like IP Phones, etc. In LLDP-MED, the capabilities of a connected device are determined and whether those capabilities are enabled. It will then keep sending out LLDP-MED packets until the remote device to which it is connected ceases to be LLDP-MED capable.
The Managed PoE Switch can be Easily Managed at Any Time.
The L3 Managed PoE Switch comes equipped with console, web, and SNMP management to allow for easy-to-use, platform-independent management. Web-based management allows for a simple, customizable configuration of the FR-5T4424P PoE+ switch. The L3 Ethernet Switch also provides a complete suite of SNMP capabilities and can be centrally managed with any standard management software. With the built-in Cisco-like command line via Telnet or console, product learning time is reduced while improving remote management capabilities through SSH connections.
|Ports||4×10Gigabit SFP plus
24×10/100/1000M Base-TX RJ45
Full/Half Duplex Mode
Auto MDI/MDI-X Connection
|Standards||IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3ae for 10 Gigabit Ethernet
IEEE 802.3x for flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.3ad for Port Trunk with LACP
|Packet Buffer Size||12Mbits|
|Maximum Packet Length||Up to 10K|
|MAC Address Table||16K|
|Transmission Mode||Store and Forward (full/half duplex mode)|
|Exchange Property||Delay time: < 7μs
Backplane bandwidth: 128Gbps
|Max. No. of VLAN||256|
|VLAN ID Range||VID 1 to 4094|
|Management Interface||CLI(Console/Telnet(RFC854)), WebUI(HTTPS), SNMPv3|
|Management||ARP, Flow Control, DDM, DHCP Server/Client, IPv4/IPv6, LLDP, LLDP-MED, UDLD, Port Mirror, RMON, SNMPv1/v2c/v3, Syslog, Telnet,|
|File Management||Firmware Upgrade/Backup, Dual Images, Configuration Download/Backup, Multiple Configuration, TFTP(RFC783), HTTP, UART|
|Management Access||Management VLAN, Management ACL(256)|
|Filter||802.1Q, GMRP, GVRP, IGMP Snooping v1/v2/v3, IGMP Querier V2/V3
|Redundant Network||Link Aggregation, STP/RSTP/MSTP/ERPSv2, Auto Edge Port, BPDU Filtering, Self Loop Detection|
|VLAN||Support IEEE 802.1Q 4K VLAN, QINQ, Double VLAN, Voice LAN, Surveillance VLAN(Auto/Manual), Multicast VLAN Registration(MVR)|
|Time Management||Local, SNTP, NTP|
|Unicast Routing||OSPFv2, RIPv1/v2, Static Route|
|QOS||Support Queue Scheduling(WRR, WFQ, Strict Priority , Hybrid(WRR+SP or WFQ+SP); Priority Queue(8 queues/port); Class of Service(Port-based, 802.1p, IP TOS Precedence, IP DSCP), Trusted QoS, Rate Limitation|
|ACL Type||L2/L3/L4, MAC-based, IPv4-based, IPv6-based|
|Diagnostic Maintenance||Support port mirroring, Syslog, Ping|
|POE Management||PoE working status
Scheduling of PoE operation
|Security||Broadcast Storm Control, HTTPS/SSLv2v3,TLSv1 RADIUS, TACACS+,AAA SSHv1/v2,Support DHCP Snooping, Option 43/82, 802.1X security access,
Support user hierarchical management, ACL access control list,
Support DOS, port-based MAC filtering/binding, MAC whitelist
|MIB||Ethernet-like MIB, MIB-II, MIB-I, Bridge MIB, Bridge MIB extensions, RMON MIB(1,2,3 & 9 groups, RFC2737 Entity, RFC2863 Interface Group, SNMP-Community-MIB|
|Installation Mode||1RU Chassis Rack-Mount Installation|
|Operating Temperature||0℃~50℃ (32to 122 ℉)|
|Operating Humidity||5%~90% (non-condensing)|
|Storage Temperature||-20℃~70℃ (-4 to 158 ℉)|
|MTBF Standard||Telcordia SR-332 GB 25℃|
|Noise Level||0 dBA|
|PoE & Power Supply|
|PoE Ports||Port 1-24||Port 1-24|
|Power Supply Pin||Default: 1/2(+), 3/6(-)||Default: 1/2(+), 3/6(-) ,4/5(+), 7/8(-)|
|Max Power Per Port||IEEE802.3 af/at 30W||IEEE802.3 af/at/bt 90W|
|Power Consumption||24 Watts Max(without PoE load)|
|Power Supply||Internal power adapter with AC100 – 240V 50-60Hz input|
|Connector||AC: 3 Pin AC Socket|
|Protection||Overload Current Protection, Reverse Polarity Protection|