Network Management Software

POE SOLUTIONS

24V Input PoE Switches

FR-7M3008P-24V

Industrial L2+ Managed 8-port 10/100/1000Base-TX (PoE+) Ethernet Switch with Redundant 24VDC Power Inputs

This model is also available in other configurations:

Non PoE: FR-7M3008L
PoE+ (802.3at): FR-7M3008P
PoE++ (802.3bt): FR-7M3008BT
PoE++ (802.3bt) 24VDC input: FR-7M3008BT-24V

Protected by hardware warranty

Advance replacement. Global coverage.

Protected by hardware warranty

Advance replacement. Global coverage.

  • Layer 2+ Features:

    • ERPSv2 redundant ring (<20ms) & STP/RSTP/MSTP
    • 802.1Q VLAN, QinQ, and GVRP
    • Dynamic LACP and static trunking
    • IGMP Snooping v1/v2/v3 and Fast Leave
    • QoS rate limiting, CoS, and 802.1p priority
    • IPv4 static routing & VLAN interfaces
  • Software Management:

    • WebGUI, CLI, and NMS management
    • SNMPv1/v2c/v3, LLDP, and SNTP
    • Port mirroring and HTTP firmware updates
    • Modbus TCP/RTU & serial protocol conversion
  • Security:

    • IEEE 802.1X and RADIUS authentication
    • MAC/IP-based ACL
    • DHCP Snooping with Option 82
    • SSHv2 and TLSv1.2 secure access
  • PoE Functions:

    • 802.3at PoE 30W per port
    • PoE scheduling / Auto PD reboot
    • Long reach PoE 250m, data rate at 10Mbps
    • PoE budget & usage threshold monitoring
  • Industrial Features:

    • Operating temperature -40°C to +75°C
    • Redundant 24VDC power inputs / Alarm relay
    • High ESD/surge protection / Fanless
    • DIP switch (RSTP / VLAN / SFP speed)
    • NDAA & RoHS compliant
Hardware Specifications
RJ45 Ports
8×10/100/1000BASE-T
Console
1x RJ45-to-RS232 Serial Port (115200)
DIP Switch
RSTP; VLAN ; SFP speed
Electrical and Mechanical
Input Voltage
Dual 24VDC
Power Consumption
10 Watts Max (without PoE load)
PoE Ports
Port 1 to 8 IEEE802.3 af/at
PoE Power Supply Type
End-span
Power Supply Pin
1/2(+), 3/6(-)
Max Power Per Port
30W
Max. PoE Power Budget
120W
Surge Protection
±6kV DC, ±4kV RJ45
Enclosure
IP40 aluminum case
Dimension
138 x 108 x 49mm, 0.7kg
Standards
IEEE 802.3
10BaseT
IEEE 802.3u
100BaseT(X) and 100BaseFX
IEEE 802.3ab
1000BaseT(X)
IEEE 802.3x
Flow Control
IEEE 802.1p
Class of Service
IEEE 802.1Q
VLAN Tagging
IEEE 802.1x
Authentication
IEEE 802.3ad
Port Trunk with LACP
IEEE 802.1D
Spanning Tree Protocol
IEEE 802.1w
Rapid Spanning Tree Protocol
IEEE 802.1s
Multiple Spanning Tree Protocol
IEEE 802.1ad
Q-in-Q tunneling
Switching
Switch Architecture
Store-and-Forward
Switch Fabric
36Gbps/non-blocking
Forwarding Rate
11.9Mpps (64-byte packet size)
Packet Buffer Size
4 Mbits
Maximum Packet Length
10K bytes
MAC Address Table
8K entries, automatic source address learning and aging
Flow Control
IEEE 802.3x pause frame for full duplex, Back pressure for half duplex
Software Features
Port Configuration
Port(Admin Status) disable/enable
Copper Port: Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Fiber Port: 100M/1000M speed selection
Flow Control disable/enable
Power saving(EEE) disable/enable
Each port description
Port Status
Display each ports’ speed duplex mode, link status, flow control status, auto negotiation status,Fiber Port Information, Port Traffic
Port Mirroring
Source Ingress/ Egress Port/ Both, Many-to-1 monitor
VLAN
Up to 4K VLAN groups, out of 4094 VLAN IDs
IEEE 802.1Q tag-based VLAN
IEEE 802.1AD Q-in-Q tunneling(Double VLAN)
GVRP(Generic VLAN Registration Protocol)
Link Aggregation
IEEE 802.3ad LACP/Static trunk
Supports 6 trunk groups with 4 ports per trunk
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
Multicast
Dynamic/Static Multicast groups
IGMP Snooping v1,2,3
Port-based IGMP Snooping Fast Leave
GMP Querier
Rate Limitation
Per Port Rate Limitation
Ingress: 16-1000000 kbps/Egress: 16-1000000 kbps
Ring
ITU-T G.8032 ERPS, Recovery time<20ms
QoS
Traffic classification based, strict priority and WRR
8-level priority for switching
-Port number
-802.1p priority
-802.1Q VLAN tag
-DSCP/TOS field in IP Packet
ACL
IP-based ACL/MAC-based ACL
ACL based on:
-MAC Address
-IP Address
-Ethertype
-Protocol Type
-VLAN ID
-DSCP
-802.1p Priority
Security
Port Security
Static MAC address
IEEE 802.1x port-based network access control
RADIUS authentication
DHCP Snooping, DHCP option 82
PoE Management Functions (PoE Model)
PoE System Management
PoE Port status monitoring
Total PoE power budget control
PoE usage threshold and temperature threshold
PoE port Priority
PoE mode(PoE/PoE+/PoE++)
PD reboot(Zero Traffic Duration)
PoE Schedule
Absolute/Periodic Mode
Layer 3 Functions
IP Interfaces
Max. 8 VLAN interfaces
Routing Table
Max.32 routing entries
Routing
IPv4 software static routing
Management
Basic Management Interface
Console; Telnet; Web browser; SNMPv1/v2c
Secure Management Interface
SSHv2, TLSv1.2, SNMPv3
System Management
Firmware Upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
Remote syslog, System log
LLDP protocol, SNTP
PREVIEW NMS
Alarm(Relay, Led, Temperature, Trap, Power)
Environmental
Operating Temperature
-40℃~75℃ (-40 to 167 ℉)
Storage Temperature
-40℃~85℃ (-40 to 185 ℉)
Operating Humidity
5%~95% (non-condensing)
MTBF
907,476 hours @ Telcordia SR-332 Standard
Cooling
Passive Cooling, Fanless Design
Noise Level
0 dBA
Regulatory
ISO
ISO-9001
Safety
IEC62368-1:2020+A11:2020
EMI
FCC Part 15B Class A, IEC 61000-3-2
EMS
IEC61000-4-2 ESD: Contact:±8kV, Air:±15Kv
IEC61000-4-5 Surge: Power: ±6kV; RJ45:±4kV
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Environmental
RoHS 2011/65/EU Annex II(EU)

AVAILABLE MODELS

Model Number Description Input Voltage Op. Temp.
FR-7M3008P-24V Industrial L2+ Managed 8-port 10/100/1000Base-TX (PoE+) Ethernet Switch with Redundant 24VDC Power Inputs Dual 24VDC -40 to +75°C
TypeVersionRelease Date
Datasheet
FR-7M3008P-24V Series Datasheet
Datasheet
4
11/11/2026
Manual
WebGUI Network Management User Manual
Manual
2.0
Manual
7 Series Quick Start Guide
Manual

Dimensions (W×D×H)

Feature illustration of an industrial Ethernet switch and its network features shown beside a bus
Fiberroad Ethernet switch operating-environment, enclosure and power-supply feature overview
Fiberroad Ethernet switch PoE power allocation and connected-device power requirements
Network management interface for Fiberroad Ethernet switch, showing device settings and configuration controls

Send Enquiry

Our team typically responds within 1 business day.

FR-7M3008P-24V

Industrial L2+ Managed 8-port 10/100/1000Base-TX (PoE+) Ethernet Switch with Redundant 24VDC Power Inputs


Your data is handled in accordance with our Privacy Policy.

POE SOLUTIONS

Industrial L2+ Managed 16-port 10/100/1000Base-TX (PoE+) + 4-port 100/1000Base-SFP Ethernet Switch with Redundant 24VDC Power Inputs

POE SOLUTIONS

Industrial L2+ Managed 8-port 10/100/1000Base-TX (PoE+) + 2-port 100/1000Base-SFP Ethernet Switch with Redundant 24VDC Power Inputs