Quality Certifications
Guarantee
Share This Product
Fiber to PoE Media Converter: The Ultimate Solution for IoT Connectivity
Fiber to PoE Media Converter enables enterprises to provide power to network devices over the existing data connection. This PoE Ethernet to Fiber Converter provides an economical path to extend the distance of an existing network with fibre cabling. Fiberroad’s original internal power adapter design provides users easy-to-install and troubleshooting.

Product Attributes | |||
---|---|---|---|
Ports | 1×10/100Base-Tx RJ45 1x 100Base-X SFP/1×9 Port |
Port Mode(Tx) | Auto Negotiation Full/Half Duplex Auto MDI/MDIX |
PoE Power Capacity | IEEE802.3 af:15.4W IEEE802.3 at: 30W |
Frame Size | 9K |
DIP Switch | FX Reset / FX100M / POE Shutdown / LFP / ALS / AI POE | ||
Input Power | AC 100~240V, 47 to 63Hz or DC9-56V | Power Consumption | af mode: 20W / at mode: 35W |
Housing | Metal | Installation Mode | Desktop or Wall Mount |
Operating Temperature | Operating: 0 to 50℃ (32 to 122℉) | Storage Temperature | Storage: -20 to +70℃ (-4 to +158℉) |
Improving Network Performance with Fiber to PoE Media Converter and Standard PoE Negotiation
The Fiber to PoE Media Converter includes a PSE controller, which offers PD signature sensing and PoE negotiation features. Which designs specifically to satisfy the growing demand for higher power required network equipment such as network cameras, VoIP telephones, multi-channel IEEE 802.11a/b/g/n wireless LAN access points and other network devices that need the power to function normally.

PoE Media Converter With AI Operation
Upgrade your network with Fiber to PoE Media Converter today! Our converters feature built-in DIP switch technology, allowing you to easily enable or disable LFPT, AI PoE function and other features with just one click. With enhanced application abilities, our media converters offer versatility and usefulness for a variety of applications. Trust in the power of Fiber to PoE Media Converters for all your networking needs!

No. | Name | Status | Function |
---|---|---|---|
SW1 | ENROM | OFF | FX Reset Disable |
ON | FX Reset Enable | ||
SW3 | POE Shutdown | OFF | POE Shutdown Disable |
ON | POE Shutdown Enable | ||
SW4 | LFP | OFF | LFP Disable |
ON | LFP Enable | ||
SW5 | ALS | OFF | ALS Disable |
ON | ALS Enable | ||
SW6 | AI POE | OFF | AI POE Disable |
ON | AI POE Enable |
Hardware Specifications | |||||
Product | FR-POE331 | FR-POE332 | |||
Copper Port | 1 x 10/100BASE-TX RJ45 | 1 x 10/100/1000BASE-T RJ45 | |||
Auto-negotiation, auto MDI/MDI-X with PoE injector function | |||||
Fiber Port | 1x 100BASE-X | 1x 1000BASE-X | |||
Form Factor | 1X9 | 1X9 | SFP | ||
Data Rate | 155M | 1.25G | 1.25G | ||
Fiber Port Type | SC | SC | LC | ||
Transmission Distance | 20km | 10km | 10km | ||
Wavelength | 1310nm | 1310nm | 1310nm | ||
Transmitter Power | -14 to -3 dBm | -9 to -3 dBm | -9 to -3 dBm | ||
Receiver Sensitivity | < -34 dBm | <-22 dBm | <-22 dBm | ||
Transmission mode | Store-and-Forward | ||||
Flow Control | Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode |
||||
Maximum Frame Size | 9K | ||||
Dimension | 140x110x40mm | ||||
Installation | Desktop | ||||
Power over Ethernet & Power Supply | |||||
Standard | IEEE 802.3af PoE Standard
IEEE 802.3at PoE+ Standard |
||||
Power Output | 52V DC, 30 watts, max | ||||
PoE Power Supply Type | Mid-span | ||||
Power Pin Assignment | 1/2(+), 3/6(-) | ||||
PoE Power Budget | 30 watts | ||||
Power Supply | 100 – 240V AC 50/60Hz | ||||
Environmental | |||||
Operating Temperature | 0 to +50℃ (32 to +122℉) | ||||
Storage Temperature | -20 to +70℃ (-4 to +158℉) | ||||
Humidity | 5% to 90% (non-condensing) | ||||
MTBF | >100,000 Hours @Telcordia SR-332 GB 25℃ | ||||
Heat Dissipation | 113 BTU/h (with 30W PoE) | ||||
Cooling | Passive Cooling | ||||
Noise Level | 0 dBA |