Quality Certifications
Guarantee
Share This Product
More Details of 2.5G TMUX Conveter
FR6000 Series is a Centralized Network Management Platform that provides 8 or 16 slots multi-service including Managed Media Converter Card, OEO Converter Card, 1+1 Protection Switching card, CWDM/DWDM MUX/DEMUX Card, etc. All interface cards, fans, management module Card and AC/DC redundant power supply are hot swappable, allowing online field replacement.
Easy Installation
Fiberroad’s 2.5G TMUX Conveter allows the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using.
Management
Management access can be achieved locally or remote standalone via network by Web, SNMP, Telnet or Console. FR6000 series together with the MUX and DEMUX can offer a space-efficient and cost-effective solution for xWDM transmission. Complete system information can be set up and displayed, including the name of chassis, terrain and related information of IP, constant operating time and the versions of the hardware and software.
SNMP Management:
Web Management:
Physical Port | |
---|---|
SFP Port | 100/1000BASE-X SFP × 2 |
SFP Port | 2500BASE-X SFP |
Fiber Mode | 1000BASE-X/2500BASE-X, 550m-120km, LC/SC |
Parameters | |
Ethernet Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x flow control and back pressure IEEE 802.3ah terminal TS-1000 |
Packet Length | 2046bytes |
Transmission Mode | Store and Forward/Cut through |
Exchange Property | Delay time: < 7ps Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps |
DIP Switches | LFP function:Disable/Enable |
Managed Features | Supports LFT (Link Fault Pass Through) Supports Digital Diagnostic Monitor Interface (DDM) for SFP Supports OAM/IP in-band management Ingress/Egress Bandwidth control per port Supports 16 IEEE 802.1Q Tag VLAN Group SNMP alarm trap for power loss and port link down Remote loop back test Dying gasp (remote power failure detection) |
LED Indicator | Power, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link, LFP |
Power Information | |
Power Input | DC 5V |
Power Consumption | Full-load<4W |
Physical Property | |
Dimensions | 120mm×90mm×22mm |
Installation Mode | wall-mountable |
Weight | 100g |
Working Environment | |
Operating Temperature | 0°C~50°C |
Operating Humidity | 10%~90% non-condensing |
Storage Temperature | -10°C~70°C |
Warranty | |
MTBF | 50,000 hours |
Defects Liability Period | 1 year warranty, lifetime technical support |
Certification Standard | |
EMC | FCC Part15 Class A CE-EMC/LVD RoHS EN61000-4-2 (ESD), EN61000-4-3 (RS) EN6100044 (EFT), EN6100045 (Surge) EN61000^1-6 (CS), EN61000-4-8 EN61000-4-11 |