Quality Certifications
Guarantee
Share This Product
High-Power 10 Port PoE Gigabit Switch
10 port PoE gigabit switch compliance with the 802.3af/at PoE+ standard supports up to 30W on each PoE port. The PoE network switch supports a total 125W PoE power budget* for the 8× PoE ports and opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, wireless access points, IP phones, computers, printers, and more.
| Product Attributes | |||
|---|---|---|---|
| Ports | 10×10/100/1000Base-T RJ45 | Switching Capacity | 20 Gbps |
| MAC Address | 4K | Jumbo Frame | 9K |
| PoE Port | Port 1 to 8 IEEE802.3af/at | Total Power | 125W@15.4W/Port |
| Input Voltage (External Power Adapter) |
100V-240VAC, 50-60Hz | Output Voltage (External Power Adapter) |
52VDC |
| Operating Temperature | 0℃ to 50℃（32℉ to 122℉） | Storage Temperature | -20℃ to 70℃（-4℉ to 158℉） |
| Housing | Metal | Warranty | 3 Years |
The PoE Network Switch is Ideal for IP Surveillance
AI VLAN: AI VLAN is essentially port isolation on each PoE port. All PoE ports can only communicate with the uplinks when this option is enabled.
AI QoS: When AI QoS is enabled, 1-4 ports prioritise video and VoIP traffic flows over others. For example, an IP camera streaming in real-time takes preference over a user transferring a backup file to a server.
Secure and extend PoE network connectivity
AI Extend: AI extend is a common PoE switch feature designed to extend PoE distance up to 250m. The downside is that port speeds will be limited to only 10Mbps.
AI PoE: The AI PoE feature (PoE watchdog) allows the switch to check the ports for activity periodically. If a port is not passing traffic for a certain amount of time, the switch will reset the power on that specific port.
| Ethernet Interface | ||
| Model | FR-5A3010P | FR-5A3208P |
| RJ45 Port | 8×10/100/1000Base-TX + 2×10/100/1000Base-Tx | 8×10/100/1000Base-TX |
| Optical Fiber Port | 2x1000Base-X(SFP） | |
| SFP Slot Port | Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) |
|
| Port Mode(Tx) | Auto-Negotiation
Full/Half Duplex Mode Auto MDI/MDI-X Connection |
|
| Standards | IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3x for flow control IEEE 802.1p for Class of Service IEEE802.3az Energy Efficient Ethernet |
|
| Packet Buffer Size | 2Mbits | |
| Maximum Packet Length | Up to 9K | |
| MAC Address Table | 4K | |
| Transmission Mode | Store and Forward (Full Wire Speed) | |
| Exchange Property | Delay time: < 7μs
Backplane bandwidth: 20Gbps |
|
| PoE & Power Supply | |
| PoE Port | Port 1 to 8 IEEE802.3af/at @PoE |
| Power Supply Pin | Default: 1/2(+), 3/6(-),Optional:4/5, 7/8(-) |
| Max Power Per Port | 30W; IEEE802.3af/at |
| Total PWR / Input Voltage | 125W(DC52V) @ 15.4W
240W(DC52V) @ 30W |
| Power Consumption | Standby＜4W |
| Power Inputs | 1 |
| Power Supply | External power adapter with AC100 – 240V 50-60Hz input
52VDC 5A output@30W per port 52VDC 2A output@15.4W per port |
| Protection | Overload Current Protection |
