Mini Fast Ethernet Media Converter

If you’re looking for an exciting way to connect your devices to the internet, look no further than the 100M Fiber Media Converter. This powerful little box converts signals from your devices into light, which is then transmitted through fiber optic cables for fast and reliable internet access. Plus, it’s super easy to set up – just plug it in and you’re ready to go!


Video Gallery

Mini 10/100M Media Converter
Mini 10/100M Media Converter
Mini 10/100M Media Converter
Mini 10/100M Media Converter
Mini 10/100M Media Converter
Mini 10/100M Media Converter
Mini 10/100M Media Converter
Mini 10/100M Media Converter
Quality Certifications
Share This Product

Mini Fast Ethernet Media Converter

The Mini Fast Ethernet Media Converter extends communication distance with the high performance of data transmission via fiber optic cable. It can build the ISP network solution of FTTH or FTTC for ISPs and FTTBs, or for small office network environments of enterprises. We also supply Media Converter Chassis, the 1U height 12 slots media converter rackmount chassis specially designed for accommodating chassis-based mini Media Converters.

Ports 1×10/100Base-T RJ45
1x100Base-X SFP/1×9
Standards and Protocols IEEE802.3i, IEEE802.3u
MAC Address 2K Jumbo Frame 10K
Cable Type(Fiber) Multimode 50/125µm, 62.5/125µm
Single-mode 9/125µm
Cable Type(Copper) UTP Cat 5, 5e, 6 Cable (Maxium 100m)
EIA/TIA-568 100Ω STP (Maximum 100m)
LED Indicatiors TP/LNK,100M, FX/LNK, PWR DIP Switch LFP/ ALS/ FX Speed/FX Reset
External Power AC 100V-240V Input Power DC 5-12V
Operating Temperature 0℃ to 50℃(32℉ to 122℉) Storage Temperature -20℃ to 70℃(-4℉ to 158℉)
Housing Metal Warranty 3 Years

Extend Transmission with Fiber Media Converter

Extend the reach of the LAN beyond the 100-meter limitation of the CATx copper cable by converting the links to fiber. Fiber links allow connections over distances of up to 100km. Fiber Media Converter migrates a local network to fiber and at the same time, protects your investment from existing copper hardware while maintaining the existing infrastructure.

Simple & Intelligent Operation

The hot-swappable design makes these converters easy to install and troubleshoot for newbies, allowing simple communication with other devices. Mini Media Converter with the LFP (link fault pass-through) function, system administrators can notice the link failure within a short period, minimizing the loss caused by this problem.

No. Function Status Description
1 LFP OFF LFP Diable
ON LFP Enable
(Only for SFP)
OFF ALS Disable
ON ALS Enable
3 FX Reset OFF RX Reset Disable
ON RX Reset Enable
4 FX Speed OFF Disable
ON Enable

1U Chassis Hosts Up to 12 Media Converters

Physical Port
Model FR-2201 FR-2203 FR-2206 FR-2222
Copper Port 1x 10/100Base-TX 1x 10/100/1000


2x 10/100/1000


1x10GBASE-T RJ45
Optical Slot 1x 100Base-X (SFP or 1×9 Transceiver SC,ST,FC connector) 1x 1000Base-X (SFP or 1×9 Transceiver SC,ST,FC connector) 1x 1000Base-X (SFP) 1x 10G SFP+
LEDs Power

SFP/1×9 Link/Activity

RJ45 Link/Activity

RJ45 Speed

UTP CAT5 or above

Max. length up to 330 ft. (100 m)

CAT6 or above

Max. length up to 100m (CAT6a)

Fiber Optic 1000BASE-SX: 50/125, 62.5/125, or 100/140-µm Multimode 550m 1000BASE-LX: 8.3/125, 8.7/125, 9/125, or 10/125-µm Single-mode 10km Multimode up to 400m

Single-mode up to 10-80km

Ethernet Standards
Standards IEEE802.3i 10Base-T

IEEE802.3u 100Base-TX & 100Base-FX

IEEE802.3ab 1000Base-T

IEEE802.3z 1000Base-X

IEEE802.3bz 2.5/5GBase-T

IEEE802.3an 10Base-T

IEEE802.3ae 10Base-R

Switching Capacity 200Mbps(FR-2201) 2 Gbps(FR-2203) 6Gbps(FR-2206) 20G(FR-2222)
Jumbo Frames 10K
MAC Address 2K
Power Input 1
Operating Voltage 5-12VDC
Power Consumption 3W Max(100Mb & 1Gb Models)

5W Max(10Gb Models)


Support Documents

Item Type Version Release Date
Mini Fiber Media Converter Product data sheet
533 KB
2D Drawing
97 KB
2D Drawing

Inquiry about the product

We’ll do our best to get back to you ASAP.

Sample request for the product

We’ll do our best to get back to you ASAP.